(New $40,000) was $7,504 now $4,199 or OBO!!
This Stratasys Fortus FinishingTouch Smoothing Station is in good working order.
Testing we performed:
The Stratasys Fortus FinishingTouch Smoothing Station passed following tests:
Tested power: PASSED
Control buttons tested: PASSED
Cooling tested to 34F/1C: PASSED
Dipping tank heater tested: PASSED
Foot pedal tested: PASSED
System consists of:
Stratasys Fortus Finishing Touch Smoothing Station
Hanger rods and hooks
Configuration and Setup:
System Size: 52.5 x 32 x 46in (1333.5 x 812.8 x 1168.39mm)
Weight: 400 lbs (182 kg)
Chamber Size: 13 x 16 x 20in (330 x 406 x 508mm)
Compatible FDM Materials:
ABSi ABSplus ABS-M30, ABS-M30i ASA, Smoothing Station Fluid (SSF)
Power Requirements 200-240 VAC, 50/60 Hz, 20 amp (dedicated circuit), single phase
Additional Requirements: 4 in (102 mm) exhaust to outside
Compressed air, minimum of 5 CFM @ 80 psi
Shipping and Rigging is an extra fee. (Usually around $1,300-2,000).
Will provide site prep and users guide upon purchase of unit.
There are no reviews yet.